Windows 10 Speaker Setup Errors? Here’s How to Identify and Solve the Problem

Looking for answers to yourSpeaker Setup (UNKNOWN) error? You’ve come to the right place! While this might be a frustrating problem, it’s often not hard to fix at all. Here’re some solutions you can try.

Before troubleshooting

Before your try anything complicated, make sure you’ve done the following:

• Restart your computer
• Replug or restart your audio device
• Check the cables, plugs, volume settings, mute switch, etc.

Fixes to try

Here’re some advanced solutions for yourSpeaker Setup (UNKNOWN) error. You might not have to try them all. Simply work down the list until you find the one that does the trick.

1. Install all Windows updates
2. Install or update your audio driver
3. Run the audio troubleshooter
4. Change the startup type of audio services
5. Check if your system is corrupted
6. Reset your PC

Fix 1: Install all Windows updates

Theoretically, Windows automatically installs the corresponding updates and drivers once you plugged in your peripherals. But that’s not always the case, especially when you’ve changed the update settings.

So you can follow these steps to install all system updates manually:

1. On your keyboard, press theWindows logo key andI (the i key) at the same time. This will open the Windows Settings app. ClickUpdate & Security .
   
2. ClickCheck for updates . Windows will then search and install available system updates. This might take up to an hour depending on your Internet speed.
   
3. Once completed, restart your computer.

To make sure you’ve installed all system updates, repeat these steps until you see “You’re up to date” when you click Check for updates .

If your problem persists after updating your system, please continue to the next solution.

Fix 2: Install or update your audio driver

One of the most common causes of this error ismissing or outdated device drivers . If Windows failed to find or install the correct driver for your audio device, you will need to do it yourself.

You can do this manually, if you like, by visiting the hardware manufacturer’s website, finding the right drivers, etc. But that takes time and computer skills. If you’re not comfortable playing with device drivers, we recommend using Driver Easy . It’s a tool that detects, downloads and installs_any_ driver updates your computer needs.

1. Download and install Driver Easy.
2. Run Driver Easy, then clickScan Now . Driver Easy will then scan your computer and detect any problem drivers.
   
3. ClickUpdate All to automatically download and install the correct version of_all_ the drivers that are missing or out of date on your system.

(This requires the Pro version – you’ll be prompted to upgrade when you click Update All. If you don’t want to pay for the Pro version, you can still download and install all the drivers you need with the free version; you just have to download them one at a time, and manually install them, the normal Windows way.)

The Pro version of Driver Easy comes with full technical support. If you need assistance, please contact Driver Easy’s support team at [email protected] .

Once you’ve installed or updated your device drivers, restart your computer and check if the Speaker Setup (Unknown) error has gone.

If this method doesn’t give you any luck, simply move on to the next one below.

Fix 3: Run the audio troubleshooter

Windows has a built-in audio troubleshooter. You can use it to try to root out the cause of your audio issue and fix the error automatically.

Here’s how:

1. On your keyboard, press theWindows logo key and typeaudio troubleshooter . SelectFix and find problems with playing sound from the results.
   
2. ClickNext , then follow the on-screen instruction to troubleshoot your audio issue.

Click here

If the audio troubleshooter failed to detect or solve your error, you can check out the next fix.

Fix 4: Change the startup type of audio services

The audio error might appear when your audio service isn’t running properly. If that’s the case,changing the startup type of your audio service could solve your problem in a snap.

So here’s how to do it:

1. On your keyboard, press theWindows logo key andR at the same time to invoke the Run box. Typeservices.msc and clickOK .
   
2. Right-clickWindows Audio and selectProperties .
   
3. SetStartup type toAutomatic . Then clickOK .

Click here

4. Use the same steps to set theStartup type of the following services toAutomatic :
Windows Audio Endpoint Builder
Remote Procedure Call (RPC)
5. Restart your computer and check if your audio device is working correctly.

If this fix doesn’t give you any luck, you can take a look at the last method.

Fix 5: Check if your system is corrupted

In the worst scenario, this could be a system-level issue. Or you can say that your system is corrupted. You need to run a complete scan to make sure there aren’t any critical issues. To do so, we recommend using Fortect . It’s a system repair solution that will fix your system without damaging settings or data.

1. Download and install Fortect.
2. Open Fortect. It will run a free scan of your PC and give youa detailed report of your PC status .
   
3. Once finished, you’ll see a report showing all the issues. To fix all the issues automatically, clickStart Repair (You’ll need to purchase the full version. It comes with a 60-day Money-Back Guarantee so you can refund anytime if Fortect doesn’t fix your problem).

Fortect comes with a 60-day Money-Back Guarantee. If you’re not satisfied with Fortect, you can contact support@fortect.com for a full refund.

Fix 6: Reset your PC

If none of the above methods works for you, you can try this ultimate solution toreset your PC . This is like reinstalling your system, but without an USB or DVD recovery media.

Note that this will restore all your settings, so be sure toback up your files to a secure location (A USB drive or cloud storage) beforehand so as to prevent any data loss.

You can follow these steps to reset your PC:

1. On your keyboard, press theWindows logo key andI at the same time. This will open the Windows Settings app. Then selectUpdate & Security .
   
2. From the left menu, selectRecovery . Under theReset this PC section, clickGet started .

3. In the pop-up window, selectRemove everything .

4. You might then see two reinstall options:Cloud download andLocal reinstall . You can chooseCloud download if you want to reinstall using the latest Windows installation files. If you don’t wish to wait, chooseLocal reinstall .

5. ClickNext and follow the on-screen instructions to reset your PC.

The reset process will take some time (up to a few hours) depending on your hard drive speed. Once you’ve reset your PC, check if your sound problem has disappeared.

So these are the solutions to your Speaker Setup (Unknown) error. If you have any questions or suggestions, please feel free to leave a comment.

Also read: